Welcome to the official website of Shenzhen kongtai Electronics Co. Ltd.!
返回大功率变压器/电抗器

Your position is now:Home - 大功率变压器/电抗器 - Reactor - UPS/EPS reactor

UPS reactor

Product description:
1. the output voltage of the UPS inverter is converted to the required load application voltage, providing the electrical isolation between the load and the UPS.
2. products are usually combined with inductance and transformer and are combined with the capacitor of the output terminal to play the role of the LC filter to make the output voltage reach a sinusoidal waveform.
3. the short circuit impedance voltage of this type of transformer is higher than that of Ucc%.

Detailed introduction


1. the output voltage of the UPS inverter is converted to the required load application voltage, providing the electrical isolation between the load and the UPS.

2. products are usually combined with inductance and transformer and are combined with the capacitor of the output terminal to play the role of the LC filter to make the output voltage reach a sinusoidal waveform.

3. the short circuit impedance voltage of this type of transformer is higher than that of Ucc%.


Technical Parameters of Reactor for UPS/EPS

Item

Standard Value

Condition

1

Inductance value

0.1mH-10mH

2

Current range

1000A

3

Insulation resistance

100MΩ

DC1000V

4

Dielectric strength

10mA

AC3KV 60s

5

Noise

≤65dB

1m away from transformer

6

Temperature rise

≤125K

Full load, forced air cooling

7

Insulation class

Class H (180)

8

Ambient temperature

0 - 35

9

Design standard

GBT10229



Application of locomotive reactor

充电站隔离(整流)变压器-(3).jpg

UPS(EPS)