UPS (EPS)-深圳市港泰电子有限公司

UPS (EPS)

Product description：

1.The product converts the UPS inverter output voltage into the required load application voltage, thus providing the electric isolation between load and UPS.
2.The product is usually of the combination form of inductance and transformer and combines with the capacitance of output end, which acts as LC filter, making the output voltage reach sinusoidal waveform.
3.The short-circuit impedance voltage Ucc% of this kind of transformer is relatively high.

Consult us

Detailed introduction

Product description:

1. The product converts the UPS inverter output voltage into the required load application voltage, thus providing the electric isolation between load and UPS.

2. The product is usually of the combination form of inductance and transformer and combines with the capacitance of output end, which acts as LC filter, making the output voltage reach sinusoidal waveform.

3. The short-circuit impedance voltage Ucc% of this kind of transformer is relatively high.

Technical parameters:

Technical Parameters of Inverter Transformer for UPS/EPS
	Item	Standard Value	Condition
1	Capacity	0.5KVA-500KVA
2	Voltage range	＜1000V
3	Insulation resistance	＞100MΩ	DC1000V
4	Dielectric strength	＜20mA	AC3.0KV 60s
5	Efficiency	≥97%	Full load
6	Noise	≤65dB	1m away from transformer
7	Temperature rise	≤125K	Full load, forced air cooling
8	Insulation class	Class H (180℃)
9	Connection mode	Dyn11
10	Short-circuit impedance	6-18%
11	Ambient temperature	0℃ - 35℃
12	Design standard	GBT10228

Technical Parameters of Reactor for UPS/EPS
	Item	Standard Value	Condition
1	Inductance value	0.1mH-10mH
2	Current range	＜1000A
3	Insulation resistance	＞100MΩ	DC1000V
4	Dielectric strength	＜10mA	AC3KV 60s
5	Noise	≤65dB	1m away from transformer
6	Temperature rise	≤125K	Full load, forced air cooling
7	Insulation class	Class H (180℃)
8	Ambient temperature	0℃ - 35℃
9	Design standard	GBT10229

下一条：UPS/EPS inverter single phase transformer